sE Electronics KLS 150 Complete Studio Set – Record on Headphones, Mix on Monitors

The Recording Set plus a pair of monitors and the cable that connects them. Track on the KLS 150 with the speakers silent, then check the mix on the Eris 3.5BT and compare it with the same audio on headphones. Microphone, interface, monitoring and both cables come in one order.

In This Setup

• sE Electronics KLS 150 – closed-back studio headphones with a custom 40 mm driver, mechanical Bass Control at the earcup, 39 Ω impedance, a 3 m locking cable, 6.35 mm and USB-C adapters and a drawstring pouch.
• sE Electronics DynaCaster DCM6 – active cardioid dynamic microphone with a built-in 30 dB DYNAMITE gain boost and balanced XLR output; needs +48 V phantom power; mic clip and pouch included.
• Audient EVO 4 – 2-channel USB-C audio interface with two 58 dB mic preamps, 48 V phantom power, Smartgain, loopback, a Hi-Z instrument input, balanced 6.35 mm monitor outputs and a 6.35 mm headphone output.
• PreSonus Eris 3.5BT 2nd Gen (pair) – pair of 3.5-inch powered monitors with 1-inch silk-dome tweeters, 50 W Class AB, 6.35 mm TRS, RCA and front 3.5 mm inputs, Bluetooth 5.0 and rear HF/LF tuning.
• Hosa MBL-100 XLR Cable (3 m) – XLR-female to XLR-male microphone cable, 3 m, for a balanced connection from the DCM6 to your preamp.
• UDG Ultimate Dual 6.3 mm Jack Cable (3 m) – dual 6.3 mm jack to dual 6.3 mm jack cable, 3 m, straight connectors, from the EVO 4 monitor outputs to the Eris 3.5BT inputs.

Why This Combination

• Two references: switch between monitors and headphones to hear how your mix holds up before you export it.
• Fits a small room: 3.5-inch monitors with rear HF/LF tuning suit a desk in a small room.
• Wired from the start: XLR for the microphone and a dual jack cable from the EVO 4 to the monitors are both included.

Set price includes the headphones, microphone, interface, monitors and both cables; mic stand sold separately.