Hollyland Pyro Ultra Transmitter – Add a Camera to Pyro Ultra
The Pyro Ultra Transmitter is the camera-side unit of the Pyro Ultra system, sold on its own for crews adding a second camera or replacing a unit on an existing rig. It takes 4K60 over HDMI or 1080p over SDI and sends it to any Pyro Ultra receiver on set. At Soundium it sits alongside the complete Pyro Ultra kits.
Key Features
-
4K60 HDMI input with loop out: Keep a local monitor wired while the same signal goes out wirelessly.
-
3G-SDI input: Connects to broadcast and cinema cameras, including fractional frame rates such as 23.98 and 59.94.
-
Broadcast Mode: One transmitter feeds an unlimited number of receivers, with stable performance up to 20.
-
Focus Mode: With Pyro Ultra receivers, latency drops to about 20 ms at 1080p25/30.
-
Up to 1.5 km range: TWiFi dual-band transmission with automatic frequency hopping and DFS support.
Quick Specs
-
Inputs: HDMI 2.0 in (up to 4K60), 3G-SDI in (up to 1080p60)
-
Outputs: HDMI 2.0 loop out
-
Range: Up to 1.5 km line of sight; up to 700 m in Broadcast Mode
-
Wireless: TWiFi 2.4 GHz and 5 GHz, DFS
-
Power: Locking DC 6–16 V or NP-F battery
-
Power consumption: 11 W (standard), 14 W (Broadcast Mode)
-
Weight and size: 320 g, 124.5 × 80 × 34.9 mm
In the Box
- 1x Pyro Ultra transmitter
- 4x easy-install short antenna
- 1x USB-C OTG adapter
- 1x 1/4-inch cold shoe
- Quick guide and warranty card
Compatibility
Pairs with Pyro Ultra receivers and, in standard mode, works within the wider Hollyland Pyro ecosystem, including Pyro 7 and Pyro 5.
Add another camera to your Pyro Ultra setup or keep a spare unit in the kit. The Pyro Ultra Transmitter, receivers and complete systems are all available at Soundium.
